User's Manual


 Charging
WithPowerSwitchon,thedevicestartsbeingchargedwhenitisconnectedwiththeTV
boxviaaUSBcableortoanypoweradaptorwithUSBplug‐in.Theledindicatorshould
stay on in red light during the course of charging, and turn off till the charging is

completed.
 LowBattery
Anytime when the device detects low battery power, the led indicator should start
flashinginredlightfor60seconds.


INSTRUCTIONS

TurnontheController
TurnonthesmartTVcontroller;theswitch‐onbuttonislocatedatthetopofcontroller;

Receiver
TheaccompaniedUSBreceiverisstoredintheslotsectionunderthebatterycover.PlugtheUSB
receiverintotheUSBportintheTVbox/Stick/tablet. 

ManualConnection
In case that the controller is not automatically connected to the box after turning the unit on,
pleasetrytoreconnectitrefertothefollowinginstructions:
• PressthepairingkeyandtheLedindicatorwillbeginflashing;
• Unplugthereceiverandre‐plugitintothebox/TVdongle;

• Onceitconnectssuccessfully,theLedindicatoronthefrontofcontrollerwillstayoninblue
for5seconds,thenthecontrollerisnowreadytouse.