User's Manual

ManualsBrandsShenzhen IPM Biotechnology ManualsControllersWireless game controller

Application:

1.Thanks very much for purchasing ipega brand PG-9120 BT controller.

2.Application device: Android and iOS Smartphone/ tablet.

3.Extendable size fit for 140-220mm smart phone and tablet,height of slot space is 10mm.

Introduction for Key Function

Due to the official game platform software upgrades or source code changes and

other not resist factors caused some of the game can not be played or connected

with our Gamepad, iPega company has no responsibility.iPega reserve the right of

final interpretation for this.

Extendable size fit for 140-220mm smart phone and

tablet,height of slot space is 10mm.

D-pad

Left 3D & L3

Charge indicator

Pair indicator

L1/L2

Charging port

HOME

When using this product,

please placed the device horizontally.

make sure the HOME key is on the right

Due to mobile system issues, some mobile may not support this device(e.g.:mobile

under MTK platform do not support)

For Android Devices

1. Scan QR code on the right through mobile, download and

install Octopus platform

2. Turn on the device by pressing both D-pad Right key

and key for 3-5 seconds until blue light flashing, open the

BT setting on mobile and search name of "PG-9120" and pair,

blue light will be on after connected.

3.Open the game platform, add installed mobile games to the

platform, open the games from the platform, then you can start

your game experience.

Pic 2

Pic 1

Pic 3

PG-9120

For IOS Devices (Direct Play Mode)

1.Enter the pairing mode by pressing both D-pad Left key

and key for 3 seconds until blue light flashing, open the

mobile BT setting and search nane of "PG-9120" and pair,

blue light will be on after connected.

2. Re-connection: Long press Home key for 3-5 second will

auto re-connected, if failed to connection, the device will turn

off and enter sleep mode in 10 minutes;

3.If need to reset the mapped buttons, please download APP;

Search "Shooting Plus" on APP store, download and install

the APP.

4.E-Introduction：Search “www.ipega.hk” and find detailed

operation introduction。

5.Support IOS system 11.0 or above

1. When the controller is off and plug in adapter, the orange light flashes slowly means the

gamepad is charging, the light will be off after fully charged,

2. While the controller is under connection status, it will automatic turn off if without any

operation in 10 minutes.

3. Turn off the device and press HOME keys for 5 seconds to enter re-connection.

4. The blue light will flash if low battery.

1.Working Voltage：DC3.7V

2.Working Current： <10 mA

3.Support continues playing up to 20H

4.Sleep Current: <10uA

5.Charging Voltage/Current：DC5V/500mA

（USB Type-C charging port）

6.BT 4.0, transmission distance：≤8M

7.Battery capacity：380mAh

8.Standby Time：30 days after fully charged

Charging/Sleep/Awaken Function:

Accessories List:

Electrical Specification：

Gamepad x1 User Manual x1 Type-C cable x1

Scan the QR code to

download Octopus

ShootingPlus V3

Paired devices

Available devices

PG-9120

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

o Reorient or relocate the receiving antenna.

o Increase the separation between the equipment and receiver.

o Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

o Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Single Side BT Controller Introduction