User's Manual

300M Wireless AP

Chapter 2 Installation

1 Physical Installation

1. Connect the device to 802.3af power adapter;

2. Install the device onto the ceiling. The connection diagram is shown below:

2 IP Configuration

The default IP address of your wireless access point is 192.168.0.254. If you are using the default IP subnet,

the computer you are using to connect to the device should be configured with an IP address that starts with

192.168.0.x (where x can be any number between 1~253) and a Subnet Mask of 255.255.255.0; if you have

changed the subnet of the wireless access point, the computer you are using to connect must be within the

same subnet. If you are not clear about this configuration, please refer to Appendix 1: Configure PC

3 Wireless Internet Connection

Win7 OS

1. Click on the desktop icon at the bottom of right hand corner;