User's Manual

300M Wireless AP

Log Setup

Here you can set up number of logs and rules of log settings. Up to 300 entries can be logged. The default

is 150.

8.4 Configuration

Backup & Restore

This section allows you to save a copy of the device configurations on your local hard drive or to restore the

previous configurations back to the device.

1. Backup: Once you have configured the device the way you want it, you can save these settings to a

configuration file on your local hard drive that can later be imported to your device in case that the device is

restored to factory default settings. To do so, click the Backup button and specify a directory to save settings

on your local hardware.

2. Restore: Click the Browse button to locate and select a configuration file that is saved previously on your

local hard drive and then click Restore to restore it. Configurations will be restored after device reboot.