User's Manual

300M Wireless AP

Click Enable to enable the SNMP feature.

1. Administrator Name: Input the administrator’s name.

2. Device Name: Input the name of the AP, e.g., WIRELESS AP.

3. Location: Input the AP’s location.

4. Read Community: Indicates the community read access string to permit reading this AP’s SNMP

information. The default is Public.

5. Write/Read Community: Indicates the community write/read access string to permit reading and re-writing

this AP’s SNMP information. The default is Private.

8 Tools

8.1 Maintenance

Firmware Upgrade

Firmware upgrade is released periodically to improve the functionality of your device or to add new features.

If you run into a problem with a specific feature of the device, log on to our website

(http://www.ip-com.com.cn/) to download the latest firmware to update your device.

Click Tools > Firmware Update to enter the screen below:

To upgrade device software:

1. Open a web browser and go to http://www.ip-com.com.cn/ to download latest firmware.