User's Manual

300M Wireless AP

1. SSID: Select the SSID from the drop-down list. It supports 4 SSIDs at most.

2. Enable: When select this item, wireless will be enabled.

3. Hide SSID Automatically: When number of clients outnumbers the maximum value, SSID will be hidden

automatically.

4. SSID Broadcast: This option allows you to have your network name (SSID) publicly broadcast or if you

choose to disable it, the SSID will be hidden. It is enabled by default.

5. AP Isolation: Isolates clients connecting to the same SSID.

6. Maximum Clients: Displays the number of clients can be connected to the current SSID. Total number

should be within 60.

7. SSID: Displays the SSID name and you can change the name here.

8. Security Mode: Select WEP, WPA-PSK, WPA2-PSK or Mixed WPA /WPA2-PSK.

(1)WEP: Enter a WEP key that is either 5~13 ASCII characters or 10~26 Hex characters if you select the

WEP encryption.

(2)WPA-PSK/WPA2-PSK: You can enable personal (PSK) or mixed mode, but you must make sure that the

wireless client also supports the selected encryption method. Enter a security key that is either 8-63 ASCII

characters or 8-64 Hex characters.

5.2 Radio

Here you can configure basic wireless settings including network mode, channel, extension channel, channel

bandwidth and etc.