Manualshelf

User's Manual

ManualsBrandsSHENZHEN IP-COM NETWORKS ManualsElectronicsWireless N300 Ceiling Access Point
11121314151617181920
300M Wireless AP
12
6. Firmware Version: Displays Device’s current firmware version.
7. Hardware Version: Displays Device’s current hardware version.
2.2 Wireless Status
This section displays radio status and SSID status.
1. Radio ON/OFF: Displays the primary SSID's wireless status.
2. Network Mode: Displays currently operative network mode.
3. Channel: Displays the channel the device is currently operating on.
4. SSID: Displays the current SSID name.
5. MAC Address: Displays the current AP's MAC address.
6. Work Status: Displays the wireless signal’s work status
7. Security Mode: Displays the current security mode.
2.3 Traffic Statistics
This section displays the AP’s traffic statistics.
1. Total RX Traffic: Total RX bytes SSID has received.
2. Total RX Packets: Total RX packets SSID has received.
3. Total TX Traffic: Total TX bytes SSID has transmitted.
4. Total TX Packets: Total TX packets SSID has transmitted.