User's Manual

41
Time & Date
System Time
Click Tools > Time & Date > System Time to enter the System Time screen. This page is used to set the
device’s system time. System time can be configured using the following 2 methods:
 Sync with Internet time servers: If enabled, system automatically connects to NTP server on the Internet
to synchronize the time.
 Set Time and Date Manually: Specify the time and date manually or click Sync with Your PC to
automatically copy your current PC's time to the device.
Configuration Steps for Setting Time and Date Manually:
❶ Uncheck Sync with Internet time servers.
❷ Click Sync with your PC or enter the correct date and time in the input fields.
❸ Click Save.
And then you can go to the Status screen to make sure the system time is correctly updated.
Note:
Once power is not delivered on this device, the time settings will be lost. By default, Sync with Internet time
servers is enabled. When the device is able to access the Internet, it will automatically connect to the NTP
server on the Internet to synchronize the time.