User's Manual

87
3. Configure the APs.
Log in to the web UI of each AP and perform the following procedure:
(1) Set Deployment of the AP to Cloud.
(a) Choose Deployment.
(b) Set Deployment to Cloud.
(c) Set Device Name to the location of the corresponding restaurant to help identify the AP.
(d) Set Cloud AC Address to the WAN IP address of the router connected to AC2000, which
is 202.105.11.22 in this example.
(e) Set Cloud AC Manage Port to the port number specified by Manage Port of AC2000,
which is 8888 in this example.
(f) Set Cloud AC Upgrade Port to the port number specified by Firmware Upgrade Port of
AC2000, which is 8899 in this example.
(g) Click Save.
(2) Configure IP address information to enable the AP to access the internet.
(a) Choose Network > LAN Setup.
(b) Set Address Mode to Dynamic IP.
(c) Click Save.