User's Manual

86
Assumption

The internet gateway has a DHCP server that assigns IP address to the APs so that the APs can
access the internet.

The router supports the DNS proxy function.
Configuration Procedure
1. Configure the router.
Map TCP port 8888 and UDP port 8899 of the router connected to AC2000 onto AC2000. For details,
refer to the user guide for the router.
2. Configure AC2000.
Log in to the web UI of AC2000 and perform the following procedure:
(1) Set Working Mode to Cloud AC.
(a) Choose System Tools > Maintain and locate the System Mode module.
(b) Set Working Mode to Cloud AC.
(c) Set Manage Port to the TCP port provided by the router, which is 8888 in this example.
(d) Set Firmware Upgrade Port to the UDP port provided by the router, which is 8899 in this
example.
(e) Click OK.
(f) Wait for AC2000 to reboot.
(2) Configure IP address information for the AP controller to access the internet.
(a) Choose System Tools > Network Setting and locate the LAN Settings module.
(b) Set IP Address to an IP address belonging to the same network segment as the IP
address of the LAN port of the router. Retain the default IP address 192.168.10.1 in this
example.
(c) Set Gateway to the IP address of the LAN port of the router. Retain the default IP address
192.168.10.254 in this example
(d) Set Preferred DNS to 192.168.10.254 because the router supports the DNS proxy
function.
(e) Click OK.