User's Manual

83
---End
Parameter description
Parameter
Description
Deployment
It specifies the deployment mode of the AP. The default option is
Local.
−
Local: In this mode, the AP can be managed only by a local AC.
−
Cloud: In this mode, the AP can be managed only by a cloud AC. To
use the cloud
deployment mode, set the following parameters as well.
Device Name
It specifies the device name of the AP. The default device n
ame is the model of the AP.
You are recommended to change the device name so that you can quickly locate the AP
when managing the AP remotely.
Cloud AC Address
It specifies the WAN IP address of the router to which the cloud AC connects, or the
domain nam
e to which the WAN IP address is bound.
Cloud AC Manage
Port
It specifies the port of the router to which the cloud AC connects for managing APs.
Cloud AC Upgrade
Port
It specifies the port of the router to which the cloud AC connects for managing APs.
 Exmaple of Configuring the Deployment
Mode
 Example of Configuring the Local Deployment
Mode
Networking Requirement
The meeting room of a hotel is deployed with multiple AP375s for wireless coverage and deployed
with AC2000 to manage the APs in a centralized manner.
Assume the that hotel does not set up VLANs. The following figure shows the topology.