User's Manual

66
Parameter
Description
Enable
It specifies whether to enable the QVLAN f
unction of the AP. By default, it is disabled.
Manage VLAN
It specifies the ID of the AP management VLAN. The default value is
1.
After changing the management VLAN, you can manage the AP only after connecting your
computer to the new management VLAN.
PV
ID
It specifies the ID of the default native VLAN of the trunk port of the AP. The default value is 1.
Trunk Port
It specifies the LAN port used as a trunk port of the AP. The default value is
port0.
Traffic of all
VLANs can pass through a trunk port.
4UZK
If
the QVLAN function is enabled, set at least one LAN port as a trunk port.
port0
corresponds to the LAN0 port and non-PoE port of the AP and port1
corresponds to the
LAN1 port and PoE port of the AP.
Wired LAN Port
It specifies the LAN ports of the AP, in
cluding LAN0 and LAN1.
4UZK
LAN0 Port
corresponds to the non-PoE port of the AP and LAN1
corresponds to the PoE port of
the AP.
VLAN ID
It specifies the VLAN ID corresponding to a wired LAN port used as an access port.
Radio 1 SSID
Radio 2 SSID
Radio 3 SSID
It specifies the currently enabled SSIDs corresponding to the RF bands of the AP.
VLAN ID
It specifies VLAN IDs corresponding to SSIDs. The default value is
1000
. The value range is 1 to
4094.
After the QVLAN function is enabled, the wireless ports corresponding to SSIDs functions as
access ports. The PVID and VLAN ID of an access port are the same.
If the QVLAN function is enabled, tagged data received by a port of the AP is forwarded to the port
corresponding to the VLAN ID in the data, whereas untagged data received by a port of the AP is
forwarded to the port corresponding to the PVID of the port that receives the data.
The following table describes how ports of different link types process transmitted and received
data.
Port
Method to Process Received
Data
Method to Process Transmitted Data
Tagged Data
Untagged Data
Access
Forward the data to other
ports of the VLAN
corresponding to the VID
in the data.
Forward the data to the
other ports of the VLAN
corresponding to the
PVID of the port that
recei
ves the data
Transmit data after removing tags from
the data.
Trunk
If the VLAN ID and PVID of a port are the
same, transmit data after removing tags
from the data.
If the VID and PVID of a port are
different, transmit data without removing
tags from th
e data.