User's Manual



Configuration procedure

1. Configure the AP.

− Assume that the IP address of the RADIUS server is 192.168.0.200, the Key is 12345678,

and the port number for authentication is 1812.

− Assume that the second SSID of RF band 1 of the AP is used.

(1) Choose Wireless > SSID Setup.

(2) Select the second SSID from the SSID drop-down list box.

(3) Select the Enable check box.

(4) Change the value of the SSID text box to hot_spot.

(5) Set Security Mode to WPA2-PSK.

(6) Set RADIUS Server, RADIUS Port, and RADIUS Password to 192.168.0.200, 1812, and

12345678 respectively.

(7) Set Cipher Type to AES.

(8) Click Save.