User's Manual

32

Configuration procedure
Assume that the second SSID of RF band 1 of the AP is used.
1. Choose Wireless > SSID Setup.
2. Select the second SSID from the SSID drop-down list box.
3. Select the Enable check box.
4. Change the value of the SSID text box to Office.
5. Set Security Mode to WPA2-PSK and Cipher Type to AES.
6. Set Key to 87654321.
7. Click Save.
---End

Verification
Verify that wireless devices can connect to the Office wireless network with the password
87654321.
Setting up a Wireless Network Encrypted Using WPA or WPA2

Networking requirement
A highly secure wireless network is required and a RADIUS server is available. In this case, WPA or
WPA2 pre-shared key mode is recommended. See the following figure.