User's Manual

18
 Network Settings
 LAN Setup
 Overview
To access the page, choose Network > LAN Setup.
This page enables you to view the MAC address of the LAN port of the AP and set the name,
Ethernet mode, IP obtaining method, and other related parameters of the AP.
Parameter description
Parameter
Description
MAC Address
It specifies the MAC address of the LAN port of the AP.
The default primary SSID of RF band 1 of the AP is IP
-COM_XXXXXX, where XXXXXX
indicates the last 6 characters of this MAC address.
Address Mode
It specifies the IP address obtaining mode of the AP. The default option is
Static IP.
−
Static IP: It indicates that the IP address, subnet mask, gateway, and DNS server
information of the AP is set manually.
−
Dynamic IP
: It indicates that the IP address, subnet mask, gateway, and DNS server
information of the AP is obtained from a DHCP server on your LAN.
4UZK
If
Address Mode is set to Dynamic IP, you can log in to the web UI of
the AP only with the IP
address assigned to the AP by the DHCP server. The IP address is specified on the client list
of the DHCP server.