User's Manual

15
Parameter
Description
IP Address
It specifies the IP address of the AP. The web UI of the AP is accessible at this IP address.
Subnet Mask
It specifies the subnet mask
of the IP address of the AP.
Primary DNS
Server
It specifies the primary DNS server of the
AP. If
it is blank, the AP does not have a primary
DNS server.
Secondary DNS
Server
It specifies the secondary DNS server of the it is blank, the AP does not have
a secondary
DNS server.
 Wireless Status
The access the page, choose Status > Wireless Status.
This page displays general RF status and SSID status of the AP. By default, the page displays the
RF status of RF band 1. To view the RF status of RF bands 2 and 3, click the corresponding tabs.
Parameter description
Parameter
Description
Radio
Status
Radio (On/Off)
It specifies whether the wireless network corresponding to the RF band is
enabled.
Network Mode
It specifies the network mode of the wireless ne
twork.
Channel
It specifies the current working channel of the wireless network.
Background Noise
(dBm)
It specifies the strength of nearby interference radio signals on the current
working channel.