User's Manual

14
 Status
 System Status
The access the page, choose Status > System Status.
The page displays the system and LAN port status of the AP.
Parameter description
Parameter
Description
Device Name
It specifies the name of the AP.
You can change the AP name on the
Network > LAN Setup page or on the SNMP
page.
System Time
It specifies the current system time of the AP.
Up Time
It specifies the time that
has elapsed since the AP was started last time.
Number of Wireless
Clients
It specifies the number of wireless clients currently connected to the AP.
Firmware Version
It specifies the firmware version number of the AP.
Hardware Version
It specifies the
hardware version number of the AP.
MAC Address
It specifies the physical address of the LAN port of the AP.