User's Manual

 Quick Setup

 Overview

This module enables you to quickly configure the AP so that wireless devices such as smart phones

and pads can access the internet through the wireless network of the AP.

This AP can work in AP or AP+Client mode.



AP mode

By default, the AP works in this mode. In this mode, the AP connects to the internet using an

Ethernet cable and converts wired signals into wireless signals to provide wireless network

coverage. See the following topology.



AP+Client mode

In this mode, the AP is wirelessly bridged to an upstream device (such as a wireless router or AP) to

extend the wireless network coverage of the upstream device.

See the following topology.