User's Manual

6
 Login
 Logging in to the Web UI of the AP
You can log in to the web UI of the AP using a web browser. The procedure is as follows:
1. Use an Ethernet cable to connect the management computer to the AP or the switch connected
to the AP.
2. Set IP address of your local area connection to 192.168.0.X (X: 2 - 253) and Subnet mask to
255.255.255.0.
3. Start a web browser on the computer, enter the management IP address of the AP (default:
192.168.0.254) in the address bar, and press Enter.
4. Enter the user name and password of the AP (default user name and password: admin) and
click Login.