封面1+空白1+内页16+空1+封底1 110*150mm 105克铜版纸黑白印刷 骑马订 DVR 4K (v3) Read me before use! Keep manual and all relevant information for future reference.
Friendly Tips: 1. The camcorder supports a SD memory card up to 256GB. We recommend a branded class-10 SD/SDHC card which is required to be formatted in the camcorder before first-time use. 2. This camcorder is equipped with one lithium battery. Please install the battery correctly before using the camera for the first time, otherwise the camera will not charge and will not boot. this video will help you: https://www.youtube.com/watch?v=cClakxJfRxY&feature=youtu.
WARNING To reduce the risk of fire or electric shock, 1. ) Do not expose the unit to rain or moisture. 2.) Do not place objects filled with liquids, such as vases, on the apparatus. Do not expose the batteries to excessive heat such as sunshine, fire or the like. Do not ingest battery, chemical burn hazard. The remote control contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
About the camera System requirement Users can ransfer videos and photos to computers with the following configurations: Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher operating system 2GB RAM 40GB above available disk memory/ Standard USB interface / 1GB GPU or higher 1920x1080 pixel or higher resolution.
Buttons/ Indicators POWER Functions Power on / off Shoot video button Confirm Open/close mode menu Set shooting menu and system menu Upward Turn on/off WIFI Downward Digital zoom out / in Take photo Pause of recording Shoot start / end Indicator light BUSY Working indicator light Indicator light CHG Charging indicator light Hot shoe MIC interface HD Base for installing handle, microphone and fill light External microphone interface(3.
Charging the battery as the shown of following picture, then close the battery cover. 2. You can use supplied USB cable to charge your camcorder via a adapter(5V/1A~5V/2A) or connect to PC directly. charging indicator * The charging indicator will be turnned on in red when the battery is in charging. Normally it takes around 4-6 hours to full charging of the battery. When the battery is fully charged, the battery life is around 70 minutes for recording (Reference test data based on turn off the Wi-Fi).
Open the touch screen, the camcorder will be powered on automatically. Power button You can also power on the camcorder by pressing the Power/OK/IR Night button. Power/OK/IR Night button for 3 seconds. Notes: It takes 5 seconds to power on/o the camcorder by openning the touch screen. If you open/close the touch screen twice in this reaction time, it may cause the camcorder can not before operating the machine again. Set the camcorder You can make custom settings of the camcorder.
Available system settings: Sub-menu Menu content Image Rotation Turn On/Turn Off (Press OK to switch) Wi-Fi Turn On/Turn Off (Press OK to switch) Wi-Fi Information Tap to open the Wi-Fi name and password of camcorder Reset Wi-Fi Confirm /Cancel Light Source Frequency Auto/50Hz/60Hz LED Indicator (Night vision) Turn On/Turn Off (Press OK to switch) Auto Screen Saver Turn Off/30s/1min/2min Auto Power Off Turn Off/3min/5min/10min Button prompt Sound High/Middle/Low/Turn Off Startup Music O
Insert and format the memory card A class 10 or higher speed memory card is recommended to normal use. 1. Open the battery cover, and insert the memory card until hear the “click” sound. Insert the card with the noted corner in the direction as illusrated. 2. To remove the memory card, open the cover and push the memory card it will be popup automatically. Format the memory card It is recommended to format the memory card before the first use.
Using the camcorder After power on the camcorder, video capture mode is the default mode. Press the Mode button or tap the Mode icon of the screen to choose the desired mode.
Playback Open the touch screen, tap the Mode icon of the screen or press the Mode button to open the mode options. Scroll down the icons of the screen, or press Down button to the end. Then tap “Playback” or press Power/OK/Light button to enter the playback mode. Press Up / Down button to scroll the images which saved in the memory card.
Connect to computer Connect the camcorder to computer is able to transfer the images to computer, also can use the camcorder as a PC camera. 1. Connect the Type-C USB port of the camcorder and the USB port of the computer with supplied USB cable. USB Cable 2. The camcorder will be powered on automatically, then screen be shown the available options.
Connect to the iDV-PRO app Use the built-in Wi-Fi of the camcorder to support you to monitor the camcorder (take photo/video) easily, also easy to download the photo/videos from the camcorder to your smartphone. Download the app and connect the camcorder’s Wi-Fi network Search for “iDV-PRO” from Google play (Android) or Apple app store (iOS) to download the app. After power on the camcorder, hold and press the UP/Wi-Fi button to open the Wi-Fi.
Troubleshooting: If you encounter problems with the camcorder, please refer to this section. 1. The camcorder cannot be turned on after installing the battery battery. (2) The battery is installed in reverse, please confirm that the battery is installed in the correct way. (3) The battery insulating paper is not removed. 2. The battery is not charging (1) If the red light of the charging indicator flashes, the battery is not in place or the contact is poor.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
VIVITAR WARRANTY This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Yourproduct will be repaired or replaced at no charge for parts or labor for a period of one year.
Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ’s on the website. Cant’t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions. For phont support in the US please call 1-800-592-9541.
