User's Manual

Lock
Press and hold Lock Button for 3 seconds on lock/unlock the display.
Note:
● Locking the display prevents settings from being accidentally changed. When locked, the
display will not respond to being tapped.
● While the display is locked, Lock Button will light up. If other buttons are tapped, Lock
Button will flash 3 times.
● The air purifier can still be controlled using Govee Home App when the display is locked.
To operate the display’s buttons, you must unlock the display.
Filter Change Indicator & Button
When the lifetime of the filter reached, the filter exchange indicator light will be lighted up
with red. After replace with the new filter, press and hold the button for 3s. When the
indicator light flashes 3 times, means the reset completed.
Note:
● After the filter reset, the filter usage time will be recalculated.
● You can also reset the filter change indicator by 3s long-press, even the indicator light
is not on.
Memory Function
Even while turned off or unplugged, the air purifier will remember its previous fan speed,
sleep mode, and night light brightness settings.
Note:
The memory function does not work with the timer, lock display feature, or night
light settings (except for the light brightness setting).
Night Light
❶ Tap once to turn on the night light.
❷ Tap again to turn off the night light.
Note:
● You can turn the night light on and off using the Night Light button, even when the air
purifier is turned off (as long as it is still plugged in to power).
● You can also adjust night light brightness using Govee Home App. The purifier unit will
remember this set brightness.
07