H7101说明书 版本：1.
Model: H7101 User Manual Govee Smart Tower Fan
Contents Safety Instructions 01 General Safety Power Cord & Plug Risk of Electric Shock & Leakage Included in the Box 02 Introduction 03 Part Names Controls Indicator Status Functions Getting Started 06 Govee Home App 07 Downloading Govee Home App Pairing with Govee Home App Care & Maintenance 08 Cleaning Maintenance Troubleshooting 09 For Govee Smart Tower Fan For App & Connectivity Appendix After-Sales Service Specifications Compliance Information 11
READ AND SAVE THESE INSTRUCTIONS Safety Instructions General Safety ● Only use the fan as described in this manual. ● To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. ● Do not operate this fan if it has been damaged. ● Supervision is required during the installation, operation, cleaning, and maintenance of this fan by children under age 12 or anyone with reduced physical, sensory, or mental capabilities.
● Do not operate this fan with a damaged cord or plug. ● Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. ● If the power cord or the plug is damaged, please contact customer service for repair or similar professionals to avoid danger.
Introduction Govee Smart Tower Fan circulates cool air or warmth from your floor to the whole room, meeting all your needs with variable speed control. Part Names a. Control Panel b. Air Outlet c. Front Base Plate d. Rear Base Plate e. Power Cord f. Power Plug g. Screw Nut h. Built-in Handle i. Air Inlet j.
Controls Power Button Touch to power on or off. Note: Press and hold the Power Button and Speed Button for 10 seconds to restore the fan to factory settings and disconnect it from Wi-Fi and Bluetooth. Oscillation Button Touch to start or stop the oscillation. Mode Button Touch to cycle through Normal Mode, Nature Mode, and Sleep Mode. Normal Mode: Always operates at the current speed. Nature Mode: Simulates a gentle breeze, making you feel like you're in nature.
Indicator Status Indicator Working Status Light Status Low Speed Solid White Medium Speed Solid White High Speed Solid White Safety Lock is ON Solid White / Flash Touch to Set a Timer Solid White Set a Timer via the App Solid White Normal Mode Solid White Nature Mode Solid White Sleep Mode Solid White Connected Solid White Connecting Quickly Flashes White Functions Memory Function The fan will remember its previous settings when powered off.
Getting Started Do not plug your fan into power before finishing the following steps: 1.Place the fan body on a dry, level surface. 2.Assemble the front base plate and the 3.Pass the power cord through the hole of the rear base plate together as a whole. base plate, and fasten the base plate with the fan body. 4.Pass the power cord through the hole 5.Fix the power cord into the buckle of the base of the screw nut and tighten the screw plate and place the fan properly on a level surface.
Govee Home App You can access more features using Govee Home App. Downloading Govee Home App To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android). Note: ● Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information.
User Servicing Instruction Cleaning To achieve the best performance, clean the fan at least once during the operating season or before storing it when it will not be used for a long period of time. ● Turn the fan off and unplug it from power, then use a soft damp cloth to clean its body, air inlet, and outlet. ● ● Do not immerse the fan in water and never allow water to drip into the motor housing.
Troubleshooting The troubleshooting section below is for solving frequently asked questions. If your problem persists, please contact customer support. For Govee Smart Tower Fan Problem Possible Solution The fan cannot be turned The fan is not plugged in. Plug it into an outlet. on or respond to any Check to see if the power cord is damaged. If so, stop using button touch. the fan and contact customer support. Plug the fan into a different outlet. The fan may be malfunctioning.
2.Cannot find the device on Bluetooth Device Nearby page of the app. ● The fan may be connected with another smartphone. Disconnect it from the other smartphone first. 3.The fan is offline. ● Make sure the fan is plugged in and powered on, then refresh “My Devices” in Govee Home App by swiping down on the screen. ● Make sure your router is connected to the internet remove and your phone’s network connection is working. ● If the Wi-Fi password has been changed, the fan will automatically go offline.
Appendix Specifications Model Name H7101 Power Voltage 120V ~, 60Hz Rated Power 37W Net Weight 2.3kg/5.07lb Dimensions 270*270*973mm/10.6*10.6*36inch Compliance Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID:2AQA6-H7101 The following importer is the responsible party Name: GOVEE MOMENTS (US) TRADING LIMITED Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448 Email: support@govee.com Contact information: https://www.govee.com/support IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
For FAQs and more information, please visit: www.govee.
