User's Manual

Details displayed on LCD
7
LCD features
Battery level indicator :
The battery level is provided by percentage of battery charge corresponding to the number of
bars and percentage displayed.
The segments in the battery level correspond to the current state of charge, 0-5% empty, 6-20%
one segment, 21-40% two segments, 41-60% three segments,61-80% four segments, and all five
are lit when charge level is above 81%.
Provides the user live data of the energy on time based upon the energy entering or leaving the
battery.
Highly recommend to fully charge T-1000 when first use.
Higher battery level indicator show, more precise the data will indicate.
Please be aware that this value can adjust multiple times as the energy draw changes from the
connected devices. This is evident during initial activation of ports with a connected device.
Recommended back to charge the T-1000 when battery indicate less than 20%. Note that when
you first plug in a power source, whether it's a solar panel or a wall charger, the T-1000 may take
a minute to detect and adjust its charge circuitry before it starts drawing power from the source.
Input status: The T-1000 is capable of providing input energy in watts.
DC output status: The display will provide output watts of the DC port.
AC output status: The display will provide output watts of the AC port.
USB output status: The display will provide output watts of the USB port and wireless
charger
Power-saving mode:
when the device enters the input or output state, it will enter the screen-off mode after more than
20 seconds, which does not affect the normal operation of the device. When the output power of
the device is less than 5W, the device will go into hibernation after more than 3 hours, and the
input can be "awakened" when the input is charged or any button is pressed. When not in use,
press the switch button to turn off the output.
H:
I:
J:
K:
L:
Battery Level Indicator
Input Status
DC Outputs Status
AC Outputs Status
USB Outputs Status
H
I
L
J
K