User's Manual

4
Function buttons
Button A: POWER ON/OFF
Button A is the main switch. Press button A to turn on or off.
Button B: SOS MODE& LED LIGHT
Function is available no matter the button “POWER ON/OFF ” is activated or not as the following
steps:
Firstly, press button B to turn on the LED light into the LED light mode.
Secondly, double click it to turn on the SOS mode.
Thirdly, press button B back to LED light mode, then press it again, the light will be turn off.
Button C: DC OUTPUT ON/OFF
Make sure the button “POWER ON/OFF” is activated before pressing button C to turn on; Press
button C to shut down the output(s) when not in use.
Button D: USB and wireless charger OUTPUT ON/OFF
Make sure the button “POWER ON/OFF” is activated before pressing button D to turn on; Press
button D to shut down the output(s) when not in use.
The USB-C cable of different devices need different endorsements of corresponding protocols, if
the USB-C port doesn't work, try to use the AC adapter to charge .
Button E: AC OUTPUT ON/OFF
Make sure the button “POWER ON/OFF” is activated before pressing button E to turn on; Press
button E to shut down the output(s) when not in use.
COOLING FAN
T-1000 utilizes an internal cooling fan to ensure the product is operating within the appropriate
temperature range. T-1000, when it experiences a higher output load, will automatically turn on
the fan during discharge or recharging, the fan may operate intermittently to keep internal
temperature within operating range.
The fan will likely start when the AC circuit is activated to ensure proper operation.