User's Manual

FUNCTION BUTTONS
6
Button A: MP500 POWER ON/OFF
Button A is the master switch. Press Button A to turn on the power or to shut down
the output(s) when not in use.
Button B: SOS MODE& LED LIGHT
Function is available no matter the Button “POWER ON/OFF ” is activated or not
as the following steps :
Firstly ,press Button B to turn on the LED light into the LED light mode.
Secondly ,double click it to turn on the SOS mode.
Thirdly ,press Button B back to LED light mode ,then press it again, the light will
be turn off.
Button C: DC OUTPUT POWER ON/OFF
Pls. make sure the button “POWER ON/OFF” is activated before pressing Button C
to turn on ;Press Button C to shut down the output(s) when not in use.
Button D:USB OUTPUT POWER ON/OFF
Pls. make sure the button “POWER ON/OFF” is activated before pressing Button D
to turn on ;Press Button D to shut down the output(s) when not in use.
The USB-C cable of different devices need different endorsements of
corresponding protocols, if the USB-C port doesn't work, try to use the AC
adapter to charge .
Button E: AC OUTPUT POWER ON/OFF
Pls. make sure the button “POWER ON/OFF” is activated before pressing Button E
to turn on ;Press Button E to shut down the output(s) when not in use.
WIRELESS CHARGER
Press “ POWER ON/OFF” Button to turn on the wireless charger. Press
“POWER ON/OFF” Button to shut down the output(s) when not in use.
COOLING FAN
MP500 utilizes an internal cooling fan to ensure the product is operating within
the appropriate temperature range. MP500,when it experiences a higher output
load, will automatically turn on the fan during discharge or recharging , the fan
may operate intermittently to keep internal temperature within operating range.
The fan will likely start when the AC circuit is activated to ensure proper operation.