制作要求 此页不印刷 成品尺寸：142x210mm 展开尺寸：284x210mm 钉装：骑马钉 材质：铜版纸 版本：V1-20211013
G300 USER MANUAL G- 3 00 12V 10A DC/PV INPUT 12~26V 60W Max. 5A Max. Thank you for purchasing G300 portable power station To make sure your personal safety, property security and user experience, please read this manual carefully before operating,and retain it for future reference. CHARGE FIRST! Before using your new Power Station G300, plug it into a suitable power outlet until it is fully charged.Then you can start your exciting journey with it.
GENERAL SPECIFICATIONS General specs Rated capacity 303.68Wh Weight (net weight) ≈3.5kg/8.5lbs Weight (including accessories) ≈4.5kg/10.5lbs Product size 244×171×177mm Input Recharging input voltage 12-26V AC/DC adapter AC 100-240V (50Hz/60Hz), DC 15V, 4A Solar charge input 12-26V, DC 4.6A max. Car charger DC 12V, 4.6A max.
SAFETY INSTRUCTIONS Read the following instructions to ensure safety before using. Improper use may result in fire, property damage or personal injury. Product use: • DO NOT use any inappropriate power cords. • DO NOT place the unit close to or in a fire on expose it to heat. Keep out of direct sunlight. • DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture. Do not drop the unit into the water.
FEATURE DETAILS 9 10 11 G-300 8 1 7 DC/PV INPUT 12~26V 60W Max. 12V 10A 2 6 5A Max. 3 5 4 13 12 10 Folding Handle 1 LCD Screen Display 6 PV Input 2 DC 5525 output 7 DC Input 11 SOS MODE & LED light 3 Cigarette Lighter Output 8 Anti-collision Strip 12 Air Intake Vent with Cooling Fan 4 USB-A Output 9 Wireless Charger 13 300W Rated AC Output 5 USB C Output Note: No user-serviceable parts inside. Recommended to fully charge the G300 before use.
LCD FEATURES I H H: Battery Level Indicator I: Input Status J: DC Outputs Status K: AC Outputs Status L: USB Outputs Status J K L HOW TO CHARGE From Solar Charger 100W 5-9 hours depending on solar conditions G - 3 00 DC/PV INPUT 12~26V 60W Max. 12V 10A From Car Port 12V 7-9 hours when car running 5A Max. From Wall Charger 110V 6-7 hours Do not connect device via ac output port while charge the G300.recommend to disconnect the G300 when fully charged. WHAT IT POWERS Laptops (41.
AC Adapter Charging It will take 6-7 hours to charge fully by using the AC adapter we provided. AC Outlet G - 300 DC/PV INPUT 12~26V 60W Max. 12V 10A 5A Max. AC Adapter Solar Panel Charging 1、DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V 2、Place Solar Panels in direct sunlight as much as possible. 3、Support 60W/80W/100W/120W Max Solar Panels (Not included), the charging time is determined by the solar light intensity. G - 300 DC/PV INPUT 12~26V 60W Max.
FUNCTION BUTTONS Button A: POWER ON/OFF Button A is the master switch. Press Button A to turn on the power and also the DC output and USB output will be activated , press it again to shut down the output(s) when not in use . The USB-C cable of different devices need different endorsements of corresponding protocols, if the USB-C port doesn't work, try to use the AC adapter to charge . Button B: SOS MODE& LED LIGHT Function is available no matter the Button “POWER ON/OFF ” is activated or not.
DETAILS DISPLAYED ON LCD BATTERY LEVEL INDICATOR : The battery level is provided by percentage of battery Charge corresponding to the number of bars and percentage displayed. The segments in the battery level correspond to the current state of charge, 1-20% one segment, 21-40% two segments, 41-60% three segments,61-80% four segments, and all five are lit when charge level is above 81%.
OPERATING INSTRUCTIONS CHARGING G300 Connect the provided AC Wall power adapter to Input, and allow G300 to fully charge prior to use, approx. 6-7 hours. When charging, the LCD Screen will be illuminated, and the LCD display will provide Battery level Indicator, G300 is fully charged when the level is 100%. It is recommended to fully charge G300 every 3 months to maintain the health of the battery pack.
EQUIPMENT CLEANING Please make sure that the device is disconnected from all input power and output devices. Wipe with a clean, dry, non-soft cotton cloth. Removing any foreign objects, dirt or other obstructions on the vents on both sides. When cleaning foreign objects in the side vents, do not allow debris, dirt or other Blockage enters the equipment. Do not use corrosive cleaners or solvents.
TROUBLE SHOOTING The device does not discharge: (1) Checking whether the connecting wire has been inserted in right place; (2) Checking whether the total output power exceeds the rated output power; (3) Checking whether the temperature of the equipment is too high.
WARRANTY PERIOD The warranty period is 12 months, and the warranty period is calculated by the original consumer purchaser from the date of purchase. In order to determine the start date of the warranty period, a sales receipt from the first consumer purchase or other reasonable documentary proof is required. REPAIR PROCESSING We will repair or replace any products that cannot be operated due to defects in workmanship or materials within the applicable warranty period.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
