User's Manual

9
No picture ꞏRe-connect with HD cable or AV cable
No sound or distorted
sound
ꞏAdjust the volume.
ꞏCheck that the speakers are connected correctly.
No audio or digital output ꞏCheck the digital connections.
ꞏCheck if your amplifier is set correctly
The player does not
respond to the Remote
Control
ꞏAim the remote control directly at the sensor on the front of the
TV box.
ꞏReduce the distance to the TV box.
ꞏReplace the batteries in the remote control.
Player does not respond to
some operating commands
during
ꞏOperations may not be permitted. Refer to the user manual.
ꞏPossibility of system halted, re-insert with power adaptor to
restart.
No sound during movies
playback
ꞏThe audio codec may not be supported by the TV box. You can
change to the supported audio on playing menu.
ꞏCheck the volume.
The contents of the USB
flash drive cannot be read
ꞏThe USB flash drive format is not compatible with the box.
ꞏIf one of the USB cannot be read, please turn off the TV box
for 30 seconds and restart the TV box.
Slow operation of the USB
flash drive
ꞏBig file size or high resolution USB flash drive takes longer
time to read and display on the TV screen.
No sound with HDMI
connection
ꞏCheck the connection between the TV and the HDMI jack of
box.
ꞏCheck your TV system setup.
ꞏCheck the volume
The TV screen is blank and
the player LED is blinking
ꞏTurn off your TV box, wait 30 seconds, turn it on again.
ꞏIf under HD status, check if HD connection is correct or
change another cable set the output resolution of this TV box
into 720P or lower resolution.