User's Manual
Pickup
sponge
cover
multi-function
button
volume
knob
indicator
light
multi-function USB Type-C interface
Product InsturctionTips
Wired recording (AUX mode)
Operation Instruction
Press and hold the multi-function
button for 3 seconds to turn it on.
When the blue light is on, there
accompanied the startup ringtone.
Press and hold the multi-function
button for 2 seconds to turn off
the light, the indicator light is off.
3
Charging
2
Shutdown
1
Boot
Wireless Mode (Bluetooth mode)
Notiz:
Bluetooth connection
Please operate on your phone.
Music playback operation
PHILIPS DLM3311C
Music Playback Operation
It can be operated on the phone or while the
player is running:
speaker
The button is always facing in your
direction, holding the microphone
perpendicular to the face, and the top is
facing the lips. At this time, the left and
right ears have the best sense of hearing
and pickup (because the speaker has
directivity, the microphone is a
heart-shaped anti-interference pointing).
The microphone volume can be adjusted by
adjusting the distance between the lips and
the karaoke. When using the product, you
can adjust freely for the best results.
1.
2.
Do not hold the sponge part in your hand.
Do not place the microphone on the
sundries. The sponge part has a built-in
speaker, which is easy to cause whistling.
3.
1.
2.
Notiz:
1.
1.
Notiz:
2.
2.
1.
2.
Microphone Performance Failure Table
Product And Accessories List Attention and FAQ
Microphone
charging cable
recording line
sponge cover
(including one that
has been assembled
on the product)
user manual
(including
warranty card)
portable bag
When the microphone is placed in a small
space or there is an object to block the
speaker, if a howling is generated, it is a
normal appearance. Please grasp the
microphone correctly and place it on a flat
surface when placed.
Low battery level may affect the quality of
playback, please charge in time.
When playing music or accompaniment in
Bluetooth mode, if it is intermittent or
distorted, the signal distance may be too
far away or the signal is interfered. Try
adjusting the distance from the phone.
If the accompaniment quality is poor or
the volume is too large, it may affect the
playback quality. Please change the
accompaniment and try to adjust the
volume appropriately.
The sound pickup has no input or too much
noise
Speakers are silent or low-volume
Cannot make cable recording or recording
quality abnormal
Cannot play mp3 music in type-C U disk
Unable to charge
Can't boot up
Cannot pair with mobile phone
Music volume cannot be adjusted
Prompt
1.
2.
3.
4.
8.
7.
6.
5.
4.
3.
2.
1.
Performance failure Please read this manual carefully before
using the product and keep it in a safe
place;
For the first time, please fully charge the
product yourself;
If the product is not used for a long time
(more than 3 months), please charge it;
Select the charger that has been certified by
the national CE certification.
4.
3.
2.
1.
Warning
Do not dismantle or repair the modified
microphone for any reason, otherwise it
may cause fire, electronic breakdown, or
even completely damage the product;
Do not place the product in an environment
where the temperature is too low or too
high (below 0 °C or above 45 °C);
Do not place the indicator light of the
device near the eyes of children or animals;
Do not use the product during thunder-
storms. Thunderstorms may cause the
device to malfunction and increase the risk
of electric shock.
Do not wipe the product with oil and other
volatile liquids;
Do not let the device get wet with liquids.
4.
5.
6.
3.
2.
1.
PHILIPS DLM3311C
In Bluetooth mode, if there is no
Bluetooth connection, it will automatically
enter pairing mode.
Search and connect to the Bluetooth
“Cozime” via the Bluetooth list of the
mobile phone, and you can connect
successfully. When the connection is
finished, the microphone will send a
“buzz” tone. At this point, you can open
the Karaoke app and also play music.
Sing in USB mode Volume Adjustment
Indicator Status Description
Start up
Shutdown
Low battery
When the
microphone is
in shutdown
charging
When the
microphone is
in shutdown
charging
When the
microphone is
power off and
full charged
When the
microphone is
power on and
full charged
blue light is always on
indicator is off
red light is flashing
red light is always on
red light and blue light are
always on at the same time
green light is always on
green and blue lights are
always on
Parametro
Model
Microphone
directivity
Speaker
Frequency response
range
Bluetooth version
Connection distance
Battery
Charging input
Charging time
Use time
Interface
Size
Implementation
standard
M1
single directivity
5W/ Ф45mm
60Hz-20KHz
4.2
7 meters (accessibility
and strong interference)
3.7V/890mAh
DC5V/0.8A
about 1.5 hours
about 4 hours
USB Type-C
57.5mmX189.5mm
GB 8898-2011
Rotate in the "-" direction to adjust the
volume of the music.
Rotate in the "+" direction to increase the
volume of the music.
Notiz:
The volume of the sound pickup input is not
adjusted with the knob. To adjust the input
volume of the microphone, you can adjust
the distance between the mouth and the
karaoke.
The long-term pressing of the sponge may
cause temporary deformation, and the karaoke
microphone may need a moment to recover.
Do not pull the sponge cover with your
fingernails or sharp objects.
Connect the mobile phone with a quality
USB charger (requires the user to
self-provide it) through the USB type-c
charging cable, and plug the charger into
the socket to automatically charge.
In the power-on state, if there is no
connection to the USB Type-C, the
microphone will automatically enter the
Bluetooth mode with the corresponding
prompt “Bluetooth Mode”.
The connected mobile phone will
automatically connect back after entering
the Bluetooth mode.
When the Bluetooth connection is
disconnected, the microphone will issue a
“beeping bell” tone and enter pairing
mode again.
Click the multi-function button to
play and pause the music.
Double-click the multi-function
button to the previous song.
Triple-click multi-function button to
the next song.
Power on state, insert the recording line, it
will automatically switch to recording mode,
accompanied by the corresponding prompt
"AUX Mode".
Connect the other end of the recording
cable to the mobile phone, open the
Karaoke app, and you can use the app to
sing and record songs.
For iPhone 7 or above, you need to
connect your own Lighting to 3.5mm
AUX cable on your phone.)
In the power-on state, the U disk inserted
into the USB Type-C interface is converted
to the U disk mode, accompanied by the
corresponding prompt "Play By USB Drive",
and then the music in the U disk is
automatically played, and you can sing
accompanied by the music.
Microfono Karaoke con
altoparlante
Music Playback Operation
It can be operated on the phone or while the
player is running:
Click the multi-function button to
play and pause the music.
Double-click the multi-function
button to the previous song.
Triple-click multi-function button to
the next song.
All-in-One Karaoke Microphone
M1
User Manual
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2)
this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter.
FCC Statement