User's Guide

http://www.idea-a.com.cn

深圳壹智云科技有限公司第

页

共

页

2. Turn on the power switch and spray switch of the robot, adjust the amount of fog,

and gently touch the spray/pause button to start the planning of spray work

；

Planning the spray

Long press the spray/pause button for 5 seconds and start drawing along

the edge

4. When the water level of the water storage tank of the machine is too low, the

machine will automatically cut off the power supply of the ultrasonic air spray

module and stop the spray work, and the display will show the red indicator light. At

the same time, the robot will return to the charging base to replenish the point

5. If personalized Settings are required, the robot can be operated through the mobile