User's Guide

http://www.idea-a.com.cn
深圳壹智云科技有限公司第 10 页 / 共 19 页
APP of the robot
function declaration ：
：：
：
1. Off key function: this product has the power saving function of turning off the LCD
screen, gently touch the off key to turn off the LCD screen, and repeat the operation
to turn on the LCD screen.
2. Timing key function: this product has the function of setting up a timer to shut
down and enter the standby state. The function can be set up for 1~12 hours after
automatic shutdown for standby state
3. Humidity key function: when the product enters the humidity function, the
"humidity" on the LCD screen flashes. The default humidity is 45%
4. Fog key function: the product is divided into low fog, medium fog and high fog. The
three levels of fog can be adjusted by pressing the fog key every time to adjust the
cycle
5. Spray power button: after the product is charged, gently touch the power button of
the sprayer to open, the spray starts to work, the LCD screen lights up, and then
gently touch the power button of the sprayer to stop working. (this design considers
the user's demand for spray humidification at fixed points)
6. Alarm of water level: when the water level is lower or higher than the set position,
the robot will alarm and return to the origin
7. The functions of App are as follows：
 Apphas the function of operating interface with the robot, such as:
off screen key function, timing key function, humidity key function,
fog key function and spray power key function .
 Planning spray function: the most used spray function mode, the robot
according to the actual environment, the bow shaped path planning spray.
 Which spray which function: it is applicable to the specified point-to-point path
area spray function, return to the origin after spraying.
 Zoning spray function: applicable to the designated area spray function, return
to the origin after spraying.