User Manual

TR-800 Service Manual
-40-
Figure 8
Removing and Installing Switch Power
1. Remove the four screws (M4.0X6.0) that secure the switch power using a screwdriver, to remove the
switch power ①, shown as Figure 9.
2. Install the switch power as the reverse steps.
Figure 9
Removing and Installing the Power Management PCB
1. Remove the four screws (M3.0X6.0) that secure the power management PCB using a screwdriver,
to remove the power management PCB ①, shown as Figure 10.
2. Install the power management PCB as the reverse steps.
Figure 10
1
1
1
1
1
1
1
1
1
1
1
1