User Manual

 Revision History
P/N Release Date Revision
Initial Release
 General
Manual Scope
This manual is intended for use by experienced technicians familiar with similar types of communication
equipment. It contains all service information required for the equipment and is current as of the
publication date.
Safety and General Information
The following general safety precautions as would normally apply, should be observed during all
phases of operation, service and repair of this equipment.
◇ This equipment should be serviced by qualified technicians only.
◇ Do not modify the repeater for any reason.
◇ To avoid electromagnetic interference and/or compatibility conflicts, do not operate your
repeater when you are near 380V AC mains or above.
◇ For vehicles with an air bag, do not place a repeater in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If a repeater is placed in the air bag
deployment area and the air bag inflates, the repeater may be propelled with great force and
cause serious injury to occupants of the vehicle.
◇ Turn off your repeater prior to entering any area with a potentially explosive atmosphere.
◇ To avoid possible interference with blasting operations, turn off your repeater when you are near
electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all
signs and instructions.
◇ Do not charge your back-up battery in a potentially explosive atmosphere
◇ Do not expose the repeater to direct sunlight over a long time, nor place it close to heating
source.