User Manual

TR-800 Service Manual
-9-
Appears when the current channel is already in use
Appears when the Monitor key is pressed to disable
CTCSS/DCS, DTMF, 2-Tone/5-Tone decoding.
Appears when the repeater is unmuted upon the monitor
key is pressed.
A
Indicates the feature development feature.
SCAN Appears while repeater scanning.
CALL Appears when transmitting a selective call.
Appears when a message is received.
Reserved
Reserved
LED Indicator
LEDs indicate real-time radio status shown as the following table:
LED Description Indicates:
Tx Red
1. Lights while the main radio is transmitting.
2. Flashes while the main radio is receiving.
3. Flashes while the main radio is monitoring channel activities.
4. Flashes while programming the main radio.
Rx Green
1. Lights while the slave radio is transmitting.
2. Flashes while the slave radio is receiving.
3. Flashes while the slave radio is monitoring channel activities.
4. Flashes while programming the slave radio.
RPT Blue, ultra bright
1. Lights while the RPT is active.
2. Goes out while the RPT is inactive.