User Manual

TR-800 Service Manual
-7-
Knockdown Mode
Setup Mode
Base Station
Forward Directional
Repeater
Reverse Directional
Repeater
Bi-directional Repeater
PC Programming Mode
Modes Description
Mode Description
Knockdown
Press the SETUP button while the repeater is
power on. The repeater enters knockdown
mode once the orange LED goes out.
Base Station
Press RPT and OPT buttons when the SETUP
orange LED is on. The radio enters base
station mode once both the RPT and OPT
blue LEDs go out.
Forward Directional
Repeater
Press RPT and OPT buttons when SETUP
orange LED is on. The repeater enters
forward directional mode once the RPT blue
LED is on while the OPT blue LED goes out.
Reverse Directional
Repeater
Press RPT and OPT buttons when the SETUP
orange LED is on. The repeater enters
reverse directional mode once the RPT blue
LED goes out while the OPT blue LED is on.
Setup
Bi-directional Repeater
Press RPT and OPT buttons when the SETUP
orange LED is on. The repeater enters
bi-directional repeater mode once both the
RPT and OPT blue LEDs is on.
PC Programming
The repeater enters PC programming mode
once command is received from PC, while the
SETUP orange LED is on.
Repeater Setup/Knockdown