User's Manual

Radio Overview

1. LED Indicator

LED Status

Glow red Power on

Glow green Receiving

Glow blue Transmitting

Flash green Power save

2. Power/Volume Control Knob

Rotate the Knob clockwise until a “click” sounds to switch the power on, red LED glows.

Turn the knob counterclockwise until a “click” sounds to switch the power off. When the

power is on, turn the knob to adjust the volume level. (Note: you are recommended to

adjust the volume to the minimum level when monitoring is not required.)

3. Speaker

4. RJ45 Programming I/O Port

Used by your dealer to program the repeater.

SCI/M I C

POWER

BUSY

DC 13.80V

LED Indicator

Power/Volume

Control Knob

Speaker

RJ45

Programming

I/O Port

Tx Antenna

Connector

Rx Antenna

Connector

DC Power Inlet

AC Power Inlet

AC Power Switch