User's Manual

10
Troubleshooting Guide
Trouble Solution
Fail to turn the repeater on Check if the AC/DC power supply cord is
properly connected, or the AC switch fuse
is blown.
Make sure you are using the same
frequency and CTCSS/DCS as the
repeater.
Can’t talk to or hear group members
Make sure you are within the coverage of
repeater.
Other voices (Non-group members) appear
on the channel
Change CTCSS/DCS of the repeater.
Make sure all the radios of your group
are changed to the same signaling.
Care and Cleaning
◇ Place the repeater in dry, ventilated and waterproof indoor environment;
◇ Clean the repeater shell with wet cloth or neutral detergent.