User's Manual

Channel Scan

¡ö¡ö

¡öScan Types

z Single Zone Scan

All channels in the current zone that have been added

to the scan list can be scanned.

z Multi Zone Scan

All channels within all the zones that have been added

to the scan list can be scanned.

z List Zone Scan

The radio only scans the channels within the specified

range of zones that have been added to the scan list.

Individually each zone is assigned with a scan list, which

provides quick recognition of the zones to be locked out

of scan list.

Note: Scan list for each zone can be added/ deleted.

¡ö¡ö

¡ö Scan Start

Press the key programmed as [SCN], scan starts from the

current channel and ascends through the channel num-

bers in scan list. “SCAN” appears on the LCD

Basic Operations

(“-SCAN X - ” in List zone scan mode, “X” is the current list

number).

Note: Scan function can be used only when two or more

channels are in the scan list.

¡ö¡ö

¡ö Scan Stop

1. Press the [SCN] key again to stop scanning. “SCAN”

disappears on the LCD.

2. Activate the Monitor function.

3. Carrier is detected on channels where no signalling is

set.

4. Carrier is detected on channels where signalling is set,

and the matching signalling is received.

¡ö¡ö

¡ö Scan Restart

When the radio stops on a busy channel, scanning can be

restarted according to the restart mode, which can be

programmed by the dealer as carrier-operated scan or

time-operated scan.

ＴＭ８００．ｐ６５ 2005-6-29, 10:1618