User's Manual

4） Select the desired message (Note 1)
5） Select “Transfer Msg” or “Delete Msg”.
If “Delete Msg” is selected, the selected massage will be deleted.
If “Transfer Msg” is selected, the following steps are required;
6） Select sending type, “Individual” or “Group Call”.
7） Use the knob selection/keypad entering to determine the desired receiver ID
(individual/group). (Please refer to
Appendix 1 for character input methods); or
press PF6 or Up/Down key to enter into the preset Call List and choose your
desired receive ID.
8） Press PF6 or the PTT key to send message.
3. Sending Fixed Message
1） Select the desired group and channel.
2） Press [Message] key (programmable key) to enter Short Message Menu and
select “Send Message”.
3） Select “FixedMessage”.
4） Select the desired fixed message (Note 1).
5） Select sending type, “Individual” or “Group Call”.
6） Use the knob selection/keypad entering to determine the desired receiver ID
(individual/group). (Please refer to
Appendix 1 for character input methods); or
press PF6 or Up/Down key to enter into the preset Call List and choose your
desired receive ID.
7） Press PF6 or the PTT key to send message.
Message Viewing and Deleting
Select “View Message” in the main menu, followed with two options:
1） To view received message, “Receive Msg” is shown on LCD;
2） To view sent message, “Message Sent” is shown on LCD;
1. Viewing or deleting received message
1） Select the desired group and channel;
2） Press [Message] key (programmable key) to enter Message Menu to choose
“View Message”;
3） Select “Receive Msg”;
4） Select the ID of the desired message;
5） Select the content of the desired message;
35