User's Manual

To enter A,B,C,D,E,F, hold down the [PTT] key, then enter 2, 5, 8, 0, *, # respectively.
3. Press the [#] key, “------” appears on the LCD indicating the memory location.
4. Enter the desired memory location number (01～32).
5. Press the [#] key again to store the DTMF number into the memory location.
If you enter a wrong digit or decide not to dial the number, press any key other than the
power switch on the front panel to exit.
▇ Confirm Stored DTMF Numbers
1. Press the [*] key, “A---” appears on the LCD.
2. Enter the desired memory location number (01～32).
The stored DTMF number or caller ID is displayed on the LCD. Press any key other
than the [PTT] key, the original display is restored.
▇ Dial Stored DTMF Numbers
1. Press the [*] key, “A---” appears on the LCD.
2. Enter the desired memory location number (01～32).
The stored DTMF number or caller ID is displayed on the LCD.
3. Press the [PTT] key to place the call.
▇ Clear Stored DTMF Numbers
1. Press the [#] key, “D----------” appears on the LCD.
2. Press the [#] key again, “D Clear” appears on the LCD.
3. Enter the desired memory location number (01～32).
To cancel the process, press any key other than [0]～[9].
4. Press the [#] key, the stored DTMF number is cleared.
▇ Redial
1. Press the [*] key, “A--” appears on the LCD.
2. Press the [0] key twice, the last number (16 digits maximum) you dialed is redialed.
The redialed number is displayed on the LCD.
3. Press the [PTT] key to place the call.
Note: The redial memory is cleared when the radio is turned off.
24