User's Manual

27
Scrambler
Press the key programmed as [Scrambler] to toggle Scrambler on/off.
Note: Emphasis/de-emphasis features are turned off when scrambler is activated and
turned on when scrambler is deactivated.
GPS Report
When GPS receiver is installed, press the key programmed as [Send GPS] to transmit
your position data.
Short Messageunder development
The received short message will scroll across the LCD. “M” and the message number
appear on the display to indicate the incoming short message.
Status Messageunder development
The received status message will scroll across the LCD. Max. 10 status messages (up to
16 alphanumeric characters per message) can be stored in the radio.
“M” and the message number appear on the display to indicate the incoming status
message.
Optional Signalling (DTMF/2-Tone/5-Tone)
The preset functions are activated when the received signal matches the optional
signalling.
When optional signalling is programmed on a channel or zone, radio LED will flash
orange and the radio will sound an alert tone or transpond to the call if a signal containing
the correct tone/code is received.
CTCSS/DCS AND / OR DTMF/2-Tone/5-Tone
Signalling
Logic
Squelch Alert Tone / Transpond
AND
Unmutes only when both CTCSS/DCS
and Optional Signalling
(2-Tone/5-Tone/DTMF) are received
and matches the preset one on
selected channel.
Activated only when both
CTCSS/DCS and Optional Signalling
(2-Tone/5-Tone/DTMF) are received
and matches the preset one on
selected channel.
OR
Unmutes when either CTCSS/DCS or
Optional Signalling
(2-Tone/5-Tone/DTMF) is received and
matches the preset one on selected
channel.
Activated only when either
CTCSS/DCS or Optional Signalling
(2-Tone/5-Tone/DTMF) is received
and matches the preset one on
selected channel.
Auto Reset
Signalling squelch will automatically turn back on when no signal is received for a preset
period of time.