User's Manual

● Time Operated Scan

Scanning remains on the active channel for only the

programmed Dropout Delay Time

(programmed by your dealer) before it resumes scanning. After the expiration of

Dropout Delay Time, the radio will begin scanning other channels even if the channel

is still busy.

▇ Dual Priority Scan

If your dealer has programmed dual priority channels, the radio will periodically detect the

activity on priority channels while stopping on non-priority channels. When any activity is

detected on the priority channels, the radio will switch to the priority channels for

communications.

“P1” appears on the LCD when the channel is set as Priority 1, “P2” appears when set as

Priority2, and “PP” when set as both Priority 1 and Priority 2.

▇ Operator Selectable Priority Channel

If priority channel is programmed by your dealer as “Operator Selectable”, you can set the

current channel as priority or non-priority channel:

Press the key programmed as [MONI] twice while holding down the key programmed as

[SCN], the current channel is changed to "Priority 2".

Press the [MONI] key three times while holding down the [SCN] key, the current channel

is changed to "Priority 1".

Press the [MONI] key four times while holding down the [SCN] key, the current channel

restores to original setting.

▇ Scan Add/Delete

This feature allows you to add/delete a channel to/from the scan list in the non-scan

mode.

2. Select the channels to be added/ deleted by using the channel selector knob.

3. Press the key programmed as [Add/Del] to toggle between ADD and DELETE.

“

”appears on the LCD when a channel is added.

Note: The radio only scans the channels that have been added to the scan list.

▇ Look Back Temporary Disable

When scanning looks back and stops on a priority channel, press the key programmed as

[Add/Del] to deactivate the Look Back function.

▇ Nuisance Channel Temporary Delete

This feature allows you to temporarily add/delete a channel to/from the scan list during

scanning.

When scanning stops on an undesired channel (e.g. nuisance channel), press the key

programmed as [Add/Del], the channel is temporarily removed from the scan list and

scanning resumes.

Note: The addition/ deletion of channels are not saved when radio exits from the scan

mode.