User's Manual

10
Radio Installation
■ Installing the Radio
1. Attach the mounting bracket, using the 4.8 x 20mm self-tapping screws, in a location
where convenient operation is accessible.
2. Connect the antenna and the supplied power cable to the radio.
3. Slide the radio into the mounting bracket and secure it using the Adjustment screws.
4. Mount the microphone hanger, using the 4 x 16mm self-tapping screws, in a location
where it will be within easy reach of the user.
5. Connect the microphone plug to the microphone jack on the front panel of the radio,
then place the microphone on the hanger.
1
3
2
4
5
6
7
8
9
12
11
10
Fig. 1 Radio Set Connection Detail
1. Microphone
2.
Mounting bracket
3. 4.8 × 20 mm Self-tapping screw
4. Microphone hanger
5. 4 × 16 mm Self-tapping screw
6. Power input connector
7. Red lead
8. Black lead
9. Fuse
10. Antenna connector
11. Main unit
12. Adjustment screw