User's Manual

第页共 32 页

1. Press the [#] key on the microphone keypad, then the LCD displays “D ------”.

2. Enter the desired number (range from 0~9, A~F) via the microphone keypad. If you

want to enter A, B, C, D, E, F, please enter 2, 5, 8, 0, *, # respectively while holding down

the [PTT].

3. Press the [#] key, the “ - - ” is displayed following the “D” character, indicating the

location of the memory number.

4. Enter the desired memory number (01~32).

5. Press again the [#] key on the microphone keypad, then the entered number is stored

into the corresponding memory.

If you dialed a wrong number or you want to cancel the dialing, please press any key on

the front panel other than the power switch to exit.

▇ Confirm the Stored DTMF Numbers

1. Press the [*] key on the microphone keypad, then the LCD displays “A --”.

2. Enter the memory number (01~32), the LCD displays the stored number or its alias.

3. Press any key other than the [PTT], the LCD resumes the initial display.

▇ Auto Dial

1. Press the [*] key on the microphone keypad, then the LCD displays “A --”.

2. Enter the memory number (01~32), the LCD displays the stored number or its alias.

3. Press the [PTT], then the number is transmitted.

▇ Clear Stored DTMF Numbers

1. Press the [#] key on the microphone keypad, then the LCD displays “D ------”.

2. Press again the [#] key on the microphone keypad, then the LCD displays “Clear - - ”.

3. Enter the memory number that to be cleared (01~32). To cancel this operation, please

press any key other than 0~9.

4. Press the [#] key on the microphone keypad, then the stored number is cleared.

▇ Redial

1. Press the [*] key on the microphone keypad, the LCD displays “A --”.