User's Manual

14
Getting Started
(Keypad type model) (Non-keypad type model)
(1) Antenna
Used to transmit/receive signals.
(2) LED
The following table indicates LED mode and corresponding radio status:
LED Status
Not lit Standby
Green Receive
Red Transmit
Flashing green Scan
Flashing red Low battery voltage
Flashing orange Call waiting
(3) Channel Selector
Used to select wanted channel.
(4) Programmable key [A]
(5) Power/Volume Control Knob
Rotate the Power/Volume Knob clockwise until a “click” is heard to turn the radio on;
rotate fully counter-clockwise to turn the radio off. When the radio is on, turn the knob
to adjust volume.
(6) Battery Latch
Used to fasten the battery.
(7) Speaker
Used to output receiver audio and alert tones
(8) Microphone