User's Manual

17
Scan
Scan feature allows you to monitor all channels.
When scan feature is enabled, the radio will detect all channels. If an active channel is
detected, the radio will remain on that channel and you will be able to hear the
conversation.
Disable/Enable Scan Feature
1. Press scan key, scanning begins.
2. Press scan key again, scanning ends.
LED flashes green in scan mode.
Callback
Pressing PTT during scanning can callback on the callback channel. Please contact
your dealer for more details about callback channel.
Nuisance Delete
Nuisance delete feature allows you to temporarily delete an unwanted channel from the
scan list.
When the radio stops on the nuisance channel, press the programmed “nuisance delete”
key until an alert tone is sounded to delete this channel.
When scan feature is enabled again. The deleted channel will return to the scan list.
Note: Priority channel can’t be deleted.
Priority Channel Scan
This feature allows you to scan important channels. The dealer can program a channel
as priority channel through the programming software. Please contact your dealer for
more details.
Note: The radio will constantly monitor the priority channel when it stops on a
non-priority channel. If an activity is detected on the priority channel, the radio will move
to and remain on the priority channel.
Music Call
Press the programmed Music call key, the radio will sound a series of rings to call and
wake the radio that has the same channel and signaling to draw the user’s attention.
Emergency Siren
The radio can be programmed to transmit emergency ANI or emit emergency siren.
1. Press Emergency Siren key to activate Emergency Siren feature.
2. Press and hold Emergency Siren key to disable Emergency Siren feature.
VOX Feature
VOX feature can be programmed to the radio by your dealer through the programming
software. Plug an earphone into the radio to enable VOX feature.