User's Manual

Radio Modes

Radio Feature Description

1. CTCSS/CDCSS/2-Tone/5-Tone

2. Channel Spacing 25KHz/12.5KHz (Wide/Narrow)

3. Programmable key

4. Squelch Tail Elimination

5. Priority Channel Scan/Nuisance Delete

6. Busy Channel Lockout

7. High/Low Power

8. Emergency Siren

9. Repeater/Talk Around

10. Call

11. TOT

12. VOX

13. Battery Save

14. Low Battery Alert

15. Voice Compression and Expansion

16. Software Upgrade

17. Wired Clone

18. PC Mode

Frame of Radio Modes

Entry for Mode Startup

User Mode

Turn the power on to enter user mode. This mode is for normal operation.

Clone Mode

1) Connect the two radios with the clone cable. Turn the power on while holding down PTT

and programmable key B simultaneously. After two seconds, a BEEP sounds and LED

glows orange indicating that the radio enters clone mode.

2) In clone mode, pressing programmable key B can begin wired clone. MCU transmit data

Power On

User Mode Clone Mode PC Mode Adjustment Mode All Reset Mode