User's Manual

20
Receiver
Measurement Adjustment
Item Condition
Test Instrument Terminal Part Method
Specification/
Remarks
1. Turn to CH13.
Press PTT.
Center frequency.
2. Press PTT.
Frequency changes to
low frequency.
Sensitivity
3. Press PTT.
Frequency changes to
high frequency.
Scanner
ANT
T1
[B] (up)
[C] (down)
Adjust the
waveform.
Press [A] to save.
1. Turn to CH14.
Press PTT.
The radio operates
with wideband.
Center frequency.
2. Press PTT.
Frequency changes to
low frequency.
Wideba-
nd
3. Press PTT.
Frequency changes to
high frequency.
Radio
Communication
Test Set
SSG output:
-118dBm
MOD: 1KHz
DEV: ±3KHz
FILTER:
0.3-3.4KHz
A
djust radio
communication
test set.
SSG output:
SINAD: 12dB
Press [A] to save.
4. Press [A] for two
seconds. LED flashes
indicating that the
radio operates with
narrowband.
High frequency.
5. Press PTT.
Frequency changes to
center frequency.
Squelch
Narrow-
band
6. Press PTT.
Frequency changes to
low frequency.
Radio
Communication
Test Set
SSG output:
-118dBm
MOD:1KHz
DEV:±1.5KHz
FILTER:
0.3-3.4KHz
ANT
Speaker Jack
A
djust radio
communication
test set.
SSG output:
SINAD: 12dB
Press [A] to save.