User's Manual

13
the first setting item, press CALL key to save and exit.
In this mode, you can operate as following:
z Select channel number from 1 to 8;
z Select frequency number from 1 to 56;
z Select interference eliminator code from 0 to 121;
z Set the number of available channels from 1 to 8;
z Scan Add/Delete.
5. PC Programming Mode
Insert programming cable into the programming jack and then turn the power on, the radio
enters PC programming mode.
6. Wired Clone Mode
Connect the radio with wired clone cable and then turn the power on while holding down
CALL and MON key simultaneously, the radio enters wired clone mode after 2 seconds.
And then press MON key to begin data transmission.
7. Default Setting Mode (It’s set by your dealer)
Turn the power on while holding down “+” and “-“ key simultaneously to restore the factory
settings after 2 seconds.