User's Manual

TC－1600 Owner’s Manual

In factory default setting, the number of available channels is 8

Fig 9 Set the Number of Available Channels

Set Channel Scan Add/Delete

When setting channel scan add/delete, “SCAN” icon appears on the bottom of LCD and

the character “y” or “n” flashes (See figure10 (a) and 10 (b). “y” indicates channel scan

add while “n” indicates channel scan delete. Press “+” / “-” key to select between “y” and

“n”. Press MENU key to confirm the setting and switch to the next setting. Press “

” key

to save the setting and return to the first setting or exit the channel setting mode.

In factory default setting, all the channels are added to scan list.

Fig 10 (a) Set Channel Scan Add Fig 10 (b) Set Channel Scan Delete

Menu Mode

The current setting of menu mode will flash when entering this mode. You can make

settings as following:

Set VOX Feature

When setting VOX feature, “VOX” icon appears on LCD and the VOX sensitivity level or

character “n” flashes (See figure11 (a)).

There are five sensitivity levels (level 1 to level 5). The higher the sensitivity level is, the

lower audio needed to trigger a transmission. The VOX feature is disabled when “n” is

selected.

Press “+” / “-” key to select sensitivity level or disable VOX feature. Press MENU key to

confirm the setting and switch to the next setting. Press “

” key to save the setting and

return to the first setting or exit the menu mode.

In factory default setting, the VOX feature is disabled.

Blink

Blink Blink