User's Manual

TC－1600 Owner’s Manual
15
is on, “ ” icon appears on the display and “+” / “-” and MON key are invalid. Holding
down MENU key and briefly pressing “
” key are both invalid. The user can
transmit/receive through PTT key, briefly press MENU key to display channel information,
or hold down “
” key to unlock the keypad.
This feature can be enabled/disabled by the dealer.
Channel Information Display
In channel number display mode, briefly press MENU key, LCD will display channel
number, frequency number and interference eliminator code of current channel.
For example, if LCD displays channel number in standby mode (See figure 3), and then:
Briefly press MENU key, LCD will display frequency number of current channel at bottom
right corner. “FREQ” icon glows at the same time. LCD switches to interference eliminator
code display automatically after 1 second and “CODE” icon glows at the same time. LCD
returns to display clock after another 1 second.
(Channel number display)
(Channel Number and Frequency Number display)
(Channel Number and Interference Eliminator Code display)
Fig 3 Channel Information Display
If the frequency indicated by the frequency number is changed through PC programming
software, LCD will display channel number and frequency number with an “n” in front of
the channel number indicating non-standard frequency number. (See figure 4)